Not getting 5.0V on J5 of compex WPJ344HV embedded board

  1. 9 months ago
    Edited 9 months ago by Winston

    I couldn't find any jumper setting on compex WPJ344HV board for getting 5.0V. The hardware guide describes that J5 of the same board gives 5.0V. But I am getting 3.3V on J5. I have five boards and all of them show 3.3V on J5.
    What could be the reason for that?

  2. Winston

    1 Aug 2016 Moderator

    Dear awkl,

    You will have to use a jumper to short the J5 jumper pins.

    Then the board will supply 5V to the miniPCIe card.



or Sign Up to reply!